Monday, February 20, 2012

RO.A.D.2012.20 a fost lansat





Lansare RO.A.D.2012.20


Sheba Distribution SRL, reprezentant al firmei Garmin înRomania, are plăcerea să anunţe disponibilitatea noii ediţii a Atlasului Digital al României v4.02, RO.A.D.2012.20.
Continuând în tradiţia binecunoscută deja clienţilor Garmin din România, Atlasul Digital al României se menţine în continuare pe locul I în clasamentul hărţilor de navigaţie rutieră, aducând în plus faţă de ediţia precedentă peste 11 mii de kilometri de drumuri, ridicând la un total de 236.802,97 km de căi de comunicaţii acoperirea în teritoriu, iar numărul de informaţii de tip punct se ridică în această ediţie la 299.184 puncte împărţite în 435 de categorii.
 ROAD2012.20 este singura hartă de navigaÅ£ie din lume care combină detalii topo cu o structură de drumuri rutabilă – la nivel inclusiv de drumuri de pământ ÅŸi poteci – cu adrese poÅŸtale de o precizie neegalată, oraÅŸe cu blocuri 3D ÅŸi modele minuÅ£ios realizate la construcÅ£ii vechi, de patrimoniu, sau noi, definitorii pentru peisajul urban actual.
Faţă de hărţile obişnuite de pe piaţă, Atlasul Digital al României are un grad de actualitate fără egal, în această ediţie găsindu-şi locul binemeritat centurile de la Domaşnea, Caransebeş şi Drobeta Turnu Severin, Pasajul Pipera 2 precum şi multe sensuri unice şi giratorii apărute între timp.
Galeria modelelor 3D s-a îmbogăţit cu reprezentările detaliate ale Universităţii de Apărare Carol I din Bucureşti, ale Arenei Naţionale, restaurantului Capşa si Bisericii Patriarhiei Române din Bucureşti.
PasionaÅ£ii de istorie vor descoperi în această ediÅ£ie în premieră elementele de detaliu ale Cetăţii de epoca fierului de la Teleac, ale cetăţilor medievale de la Enisala ÅŸi de la Cluj-Napoca ÅŸi ale aÅŸezării fortificate de epoca bronzului de la CorneÅŸti  precum ÅŸi ale multor alte obiective de interes istoric sau arheologic.
Dispunând de un concept original, cu actualizări trimestriale, rodul muncii pasionaţilor şi specialiştilor din echipa Proiectului România Digitală , Atlasul Digital al României este opţiunea profesioniştilor din toate domeniile şi unealta preferată de navigaţie a pasionaţilor de drumeţii în aer liber.
Ediţia actuală are 480 MB mărime şi rulează exclusiv pe echipamente de navigaţie Garmin, o listă a acestora fiind disponibilă mai jos

O versiune pentru PC pe platforma MapSource este în lucru şi planificată să fie lansată spre sfârşitul lunii martie 2012.

1.
Dakota 20;
2. Edge 605 ÅŸi 705;
3. eTrex Venture CX;
4. eTrex Vista HCX ÅŸi eTrex Legend HCX;
5. Gpsmap 60 CX, 60 CSX ÅŸi 76 CX, 76 CSX;
6. Gpsmap 62, 62s, 62st, 78, 78s;
7. toate Nuvi 2xx (Nuvi 2x0,2x0W, 2x5, 2x5W);
8. Nuvi 5xx;
9. Nuvi 6xx;
10. Nuvi 7x5;
11. Nuvi 12xx;
12. Nuvi 13xx ÅŸi 14xx;
13. Nuvi 37xx;
14. Nuvi 300 ÅŸi 350;
15. Nuvi 310, 360 ÅŸi 370;
16. Nuvi 2360;
17. Oregon 200, 300 ÅŸi 400;
18. Oregon 450, 550, 450T ÅŸi 550T;
19. Zumo 4xx ÅŸi 5xx;
20. Zumo 660;
21. Gpsmap 620;
22. Gpsmap 420s;
23. Gpsmap 526s.

24.11.2011
Se poate instala harta şi pe următoarele dispozitive:
1. Colorado
2. Montana 6xx
3. Nuvi 1490TV
4. Nuvi 7xx
5. Nuvi 3490

16.01.2012
Se poate instala harta şi pe următoarele dispozitive:
1.GVN-52
2.Nuvi 24x0
3.Nuvi 24x5 ÅŸi 25x5

24.01.2012
Se poate instala harta şi pe următorul dispozitiv:
1.StreetPilot C3x0

Versiunea Mapsource va fi şi ea una modificată şi va beneficia astfel de capabilitatea de a citi hărţile criptate, care sunt disponibile acum doar pe terminalele Garmin cu firmware modificat.

RO.A.D. este o marca înregistrată a Sheba Distribution SRL.


Keywords: Downloads, Garmin, GPS Maps, GPS Software, Imagini RO.A.D.2012.20, NEWS, Prezentare RO.A.D.2012.20, Romania digitala, Tutorials.


Friday, February 17, 2012

BartPE

Download BartPE
PE Builder v3.1.10a - self-installing package
PE Builder v3.1.10a - zip package


What is BartPE and PE Builder?
Bart's PE Builder helps you build a "BartPE" (Bart Preinstalled Environment) bootable Windows CD-Rom or DVD from the original Windows XP or Windows Server 2003 installation/setup CD, very suitable for PC maintenance tasks.

It will give you a complete Win32 environment with network support, a graphical user interface (800x600) and FAT/NTFS/CDFS filesystem support. Very handy for burn-in testing systems with no OS, rescuing files to a network share, virus scan and so on.
This will replace any Dos bootdisk in no time!




A word from the author


Hi, my name is Bart Lagerweij. I've been creating DOS based boot disks and bootable CD-Roms from Dos 3.x (not sure what year) until 2002. I have created the: Corporate Modboot, Network bootdisk, CD-Rom bootdisk, a hardware independent Dos CD-Rom driver eltorito.sys and lots of other tools needed to boot a PC the way I want it to.

As you can read above I've stopped doing that in 2002. Why? I saw a Windows PE (WinPE) bootable CD-Rom (from Microsoft) in action and I got very, very curious. I knew then as I know now, that in time PE-based solutions will be every PC technicians best friend.
Goodbye to all the good and bad dos-based NTFS utilities! Now we can boot from a CD-Rom and have full read/write access to NTFS volumes!

Here are a few things that are possible with PE and are not possible with any type of dos-based boot disk, even when using network support and ntfsdos:
  • Accessing very large (>2TB) NTFS volumes or accessing volumes that are not seen by the BIOS, like some fibre channel disks.
  • Very reliable scanning and cleaning of viruses on NTFS volumes using a "clean boot".
  • Active Directory support.
  • Have remote control over other machines, using vnc or remote desktop.

While I was already thinking about what great things this could do, I noticed the end-user license agreement for Microsoft software that is included with Windows Preinstallation Environment (Windows PE) 1.2 (eula.txt). In section "1. ELIGIBILITY." it states the following:
..."You may only install and use the SOFTWARE PRODUCT if you are an active Microsoft Software Assurance Member ("SAM") for the systems product pool or servers product pool, if you currently have license coverage for Microsoft Windows operating system (OS) Upgrades via a Campus Agreement or School Agreement, or if you are a current or former participant in the Windows XP Joint Development Program, Windows XP Rapid Adoption Program, Windows .NET Server Joint Development Program, or Windows .NET Server Rapid Adoption Program. If you do not meet one or more of the requirements listed above, you may not install or use this SOFTWARE PRODUCT and you must terminate the installation of this SOFTWARE PRODUCT immediately"...

Oops, that does not include me. As a matter of fact that does not include most of us! This was very disappointing. But then I started thinking, how difficult can it be to build something similar to Windows PE from a Windows XP installation CD-Rom? A quick file compare looked like most of the needed files are on the Windows XP CD-Rom. Only because I thought building this would be easy, I started coding my own builder program. Had I known how hard it would be, I would probably never have started programming PE Builder.
This first version (v1.0.0) of PE Builder was released on April 28, 2003. Yes, version 1 was a very simple, very static, very bad and copyright violating program. And the (very friendly) people at Microsoft had every right to kick my butt. But I learned from it and in May 2003 I started on a second version. In July (three months later) v2 was ready.
Version 2 did not have the problems that version 1 had. The version 2 build engine had its own registry hive builder which was not easy to program and took about 50% of my research and coding time. It also was dynamic enough that it could build from Windows XP and Server 2003. In v2.0.1 I added a small but very powerful menu program called nu2menu, which was written by my buddy Henk de Jong. The latest 2 version (v2.0.2b) even used a new ISO filesystem called "ISO-9660:1999 (version 2)" instead of the Joliet extensions. Some non-English versions of Windows XP had filenames longer than the maximum allowed length for Joliet filenames (103 chars). I had to patch the ISO building program (mkisofs.exe) so that the Windows NT bootstrap and setup loader would boot properly. The file and directory names can now be up to 207 characters. But again this version had something bad. When comparing some INF files they looked too much like the Windows PE builder from Microsoft.

I had to change the entire INF file layout to use its own format. And on Sep 1, 2003 (almost 6 months after starting) version 3 was ready. After adding plugin support, PE Builder got very popular. People from all over the world are writing their own plugins to add the program they like and use.


Copyright (c) by Nu2 Productions



Keywords: Bootable Windows CD, Bootable Windows DVD, Creating Bootable CD, Creating Bootable DVD, Downloads, Free Software, Freeware Software, Tutorials.


GetDataBack

Download GetDataBack V4.25

GetDataBack for NTFS: $79 USD (Free demo)
GetDataBack for FAT: $69 USD (Free demo)


Available Plugins For WinPE and BartPE

GetDataBack for FAT V4.25 plugin
GetDataBack for NTFS V4.25 plugin
DriveImage XML V2.30 plugin
DiskExplorer for FAT V4.25 plugin
DiskExplorer for NTFS V4.25 plugin
DiskExplorer for Linux V4.25 plugin
Captain Nemo Pro V5.05 plugin
Captain Nemo V3.33 plugin
RAID Reconstructor V4.25 plugin
NAS Data Recovery V2.01 plugin
RAID Recovery for Windows V1.32 plugin
HdHost V1.01 plugin



 If the software needs a license key you can enter the license key in the application at run-time or in advance in a certain section inside the ".inf" file. We kept the plugins as small as possible; therefore, we did not include the help file (CHM) or the startup flash logo.


Free Updates: Lifetime updates for licensed users.

System Requirements: Pentium Processor - 32 MB RAM
Windows 95, 98, ME, NT, 2000, XP, 2003, Vista or Windows 7


Product Highlights
Recover ALL your hard drive's data
Safe, read-only design
Three easy steps
Advanced options for the advanced user
 Free to try
Free lifetime updates with purchase
Run GetDataBack from a Boot Disk

GetDataBack is more than an undelete or file recovery program or a system restore. 
GetDataBack will recover your data if the hard drive's partition table, boot record, FAT/MFT or root directory are lost or damaged, data was lost due to a virus attack, the drive was formatted, fdisk has been run, a power failure has caused a system crash, files were lost due to a software failure, files were accidentally deleted. GetDataBack can even recover your data when the drive is no longer recognized by Windows. It can likewise be used even if all directory information - not just the root directory- is missing. 

Get everything back, The safe and easy way.
Advanced algorithms make sure that all directories and sub directories are put together as they were, and that long file names are reconstructed correctly. GetDataBack is read-only, meaning the program will never attempt to write to the drive you are about to recover. Our software enables an inexperienced user to conduct their own data recovery by guiding them through three easy to understand steps. If you are an advanced user there are options to adjust the recovery process and improve the results.

Free to try
Download the trial version and recover your files. You can preview your data to be sure it actually works. If you like the results you do not need run the program again. Purchase the license key and enter it into the open program. Then copy everything you need!

Free lifetime updates
GetDataBack comes with free updates for the lifetime of the software. Unlike competitors who require you to buy a new version every year, our first GetDataBack customers from 2001 are still enjoying the newest versions of our software!

Recover files over your local network or serial cable
This feature enables you to run GetDataBack on one computer ("remote") while accessing the drives of another computer ("host"). Recovering data over a network is useful, especially when you are not able to remove the drive you want to recover from and attach it to another computer. Just download HDHost and install it on the computer you want to recover data from.

No working Windows?
Run GetDataBack from a BartPE boot CD-ROM.

Watch our tutorial on YouTube about creating a BartPE Boot CD-ROM.


Keywords: Data Recovery Software, Recover deleted files, Recover deleted files free, Recover Documents, Recover files, Recover Music, Recover Pictures, Recover Video, Recovery data software, Recovery data tools.